Star Within a Square

IMG_0067[1]

The star part of this was incredibly easy – of course, it is just a simple ripple in the round, but I fought with the squaring of it for longer than I care to retell, lol.  Hopefully I have explained it fairly adequately.  It ended up being a tad smaller than the Square Within a Square block, but I think I will add an edging to each block, of sc, hdc or dc; whatever is necessary to make them all the same size.

I am using a worsted weight yarn and a size F hook.

Abbreviations & Definitions
beg: beginning
ss: slip stitch
sc: single crochet
hdc: half double crochet
dc: double crochet
trc: triple crochet
bpsc, bphdc, bpdc, bptc: back post single, half-double, double or triple crochet (work the stitch behind the last round)
sk: skip
rnd: round
std: standing
picot: chain 3, slip stitch into top of stitch below
v st: v stitch – 2 dc, ch 2, 2 dc in a ch 2 space
beg v st: beginning v stitch – ch 3, dc, ch 2, 2 dc in 1st ch 2 space

To learn basic crochet stitches, you can go here.   You can read about post stitches here.

NOTES:

  1. All single crochet rounds begin with either a standing sc or a ch 1 in a magic circle, half double crochet rounds begin with a standing hdc or ch 2, all double crochet rounds begin with a standing dc or ch 3, all triple crochet rounds begin with a standing tc or ch 4.
  2. All rounds end by joining to the beginning stitch with a slip stitch.
  3. Don’t forget that hard to find first stitch after the corner, sometimes called the ‘hidden stitch’.  See more about that at Diedre Ulys’ blog.
  4. All instructions in () parenthesis will be followed with X & a number, meaning repeat these instructions that many times.
  5. Anything in [] square parenthesis and italics are notes from pattern writer.
  6. There are many links in this post, to crochet stitches, and tips.  Simply click on the underlined words, which will take you to a new page.
  • Round 1:  In a magic circle, std dc,dc, ch 2, (2 dc, ch 2) X 5, join with ss to beg dc. [12 dc and 6 ch 2 sp]

IMG_0017[1]

  • Round 2:  Beg V st, (V st) X 5, join with ss to first st, finish off. [24 dc & 6 ch 2 sp =  6 v stitches]

IMG_0019[1]

  • Round 3:  With new color, beg V st, dc in next st, sk 2 st, (dc in next st, V st, dc in next st, sk 2 st) X 5, join with ss to beg dc [36 dc & 6 ch 2 sp = 6 v stitches & 12 dc]

IMG_0020[1]

  • Round 4:  Beg V st, dc in next 2 sts, sk 2 st, (dc in next 2 sts, v st, dc in next 2 sts, sk 2 st) X 5, join with ss to beg dc [6 v stitches & 24 dc] 

IMG_0022[1]

  • Round 5: With new color, beg V st, dc in next 3 sts, sk 2 st, (dc in next 3 sts, V st, dc in next 3 sts, sk 2 st) X 5, join with ss to beg dc [6 V stitches & 36 dc]

IMG_0023[1]

  • Round 6: With new color, beg V st, (dc in next 4 sts, sk 1 st, (working BETWEEN that st and the next, sc, ch 7, sc), sk 1 st (dc in next 4 sts, V st, X 5, dc in next 4 sts, sk 1 st, (working BETWEEN that st and the next, sc, ch 7, sc) dc in next 4 sts, join with ss to beg dc [6 V stitches, 6 ch 7 loops, 72 dc, 12 sc]

IMG_0051[1]

This next part is what threw me so much.  Turn the block to the wrong side, and hold it as in the picture (there is a point in the center, begin to the right side of that point.  Work with new color grouping). 

  • Round 7, the Square:
  1. Side 1:  Working on wrong side, ss to back of 3rd st from beg of rnd 6, ch 3, ss under loop, ch 3, ss to rdn 4 [directly under the center of the  point],  IMG_0053[1] ch 3, ss under loop on rnd 6, ch 3, ss to 3rd st from end on rnd 6, ch 3, turn to side, ss in same st [corner made]
  2. Side 2:  ch 3, ss to 2nd st of round 5, ch 3, ss into the 5th and 6th st of rnd 5 [this puts the stitch directly under the loop]  IMG_0052[1], ch 3, ss to 2nd st from end of round 5 [the first half of the point, ch 3, ss to the side of  2nd st from the end of round 6, ch 3, turn, ss in same st [corner made]
  3. Working on wrong side, ss to back of 3rd st from beg of rnd 6, ch 3, ss under loop, ch 3, ss to rnd 4 [directly under the center of the  point], ch 3, ss under loop on rnd 6, ch 3, ss to 3rd st from end on rnd 6, ch 3, turn to side, ss in same st [corner made]
  4. Side 4:  ch 3, ss to 2nd st of round 5, ch 3, ss into the 5th and 6th st of rnd 5 [this puts the stitch directly under the loop] , ch 3, ss to 2nd st from end of round 5 [the first half of the point], ch 3, ss to the side of  2nd st from the end of round 6, ch 3, turn, join to beg ss  [corner made] 

Square up your outline as best you can, sliding the slip stitches up or down as needed to create a straight line.  16 ss & 64 ch]

IMG_0054[1]

  • Round 8:
  1. Side 1:  Still working on wrong side, dc in beg ch 3 sp, (ch 1, sk 1 st, dc in next st) X 8, ch 1, dc in corner ch 3 sp, ch 3, dc [corner made].
  2. Side 2: (ch 1, sk 1 st, dc in next st) X 8, ch 1, dc in corner ch 2 sp, ch 3, dc [corner made].
  3. Side 3: (ch 1, sk 1 st, dc in next st) X 8, ch 1, dc in corner ch 2 sp, ch 3, dc [corner made].
  4. Side 4: (ch 1, sk 1 st, dc in next st) X 8, ch 1, dc in corner ch 2 sp, ch 3, join to beg dc with ss [corner made]. [40 dc, 36 ch 1 sp & 4 ch 3 sp]

Your work may feel tight at this point; not to worry, it should ease up.

IMG_0055[1]

  • Round 9:  [Turn the work to the right side now. ] 
  1. Side 1:  [Start on the side with a large point in the center, with loops to either side] ss to center of ch 3 sp [corner] 2 hdc,  (hdc in dc, hdc in ch) X 9, hdc in dc. In ch 3 sp work: 2 hdc, ch 3, 2 hdc [corner made]
  2.  (hdc in dc, hdc in ch) X 9, hdc in dc. In ch 3 sp work: 2 hdc, ch 3, 2 hdc [corner made]
  3.  (hdc in dc, hdc in ch) X 9, hdc in dc. In ch 3 sp work: 2 hdc, ch 3, 2 hdc [corner made]
  4.  (hdc in dc, hdc in ch) X 9, hdc in dc. In ch 3 sp work: 2 hdc, ch 3, join with ss to beg hdc [corner made] [92 hdc, 4 ch 3 sp]

Back Side                                                                                   Front Side

IMG_0056[1]                IMG_0057[1]

  • Round 10: [In this round, make the dc’s that go through the loop and the hdc rather loosely]
  1. Side One:  [Start on the side with a large point in the center, with loops to either side] With new color, work 2 dc in  ch 3 corner, dc in next 4 hdc, dc through the loop on rnd 6 of the star AND the hdc behind it,  IMG_0065[1] dc in next 13 hdc,  dc through the loop on rnd 6 of the star AND the hdc behind it, dc in next 4 hdc.  In the ch 3 loop work: 2 dc, ch 2, 2 dc [corner made]
  2. dc in next 23 dc’s, In the ch 3 corner work: dc, ch 2, dc. [corner made]
  3. dc in next 4 hdc, dc through the loop on rnd 6 of the star AND the hdc behind it, dc in next 13 hdc,  dc through the loop on rnd 6 of the star AND the hdc behind it, dc in next 4 hdc.  In the ch 3 corner work: dc, ch 2, dc. [corner made]
  4. dc in next 23 dc’s, In the ch 3 corner work: dc, ch 3, join to beg dc with ss. [corner made] [108 dc & 4 ch 2 corners]

IMG_0064[1]

  • Round 11:   [Working in the back posts except on corners and loops!]
  1. Side one: [Start on the side with a large point in the center, with loops to either side]  2 hdc in ch 2 corner, bphdc in next 27 st, in the ch 2 corner work: dc, ch 2, dc. [corner made]
  2.  Side two:  bphdc in next 13 dc, dc through the loop on rnd 6 of the star AND the hdc behind it, bphdc in next 13 dc, 2 hdc in ch 2 corner, bphdc in next 27 st, in the ch 2 corner work: dc, ch 2, dc. [corner made]
  3. Side three:  bphdc in next 27 st, in the ch 2 corner work: dc, ch 2, dc. [corner made]
  4. Side 4:   bphdc in next 13 dc, dc through the loop on rnd 6 of the star AND the hdc behind it, bphdc in next 13 dc, 2 hdc in ch 2 corner, bphdc in next 27 st, in the ch 2 corner work: dc, ch 2, dc. [corner made]

IMG_0066[1]

  • Round 11:
  1. Side one: [Start on the side with a large point in the center, with loops to either side] 2 dc in ch 2 corner, ch 1, sk 1 st, dc) X 7, ch 1, dc through the ch 2 sp of the point on rnd 6 of the star AND the hdc behind it, ch 1, sk 1 st, dc) X  7, ch 1,  in the ch 2 corner work: dc, ch 2, dc. [corner made]
  2.  Side two:  (ch 1, dc) X 3, ch 1, trc through the loop on rnd 6 of the star AND the hdc behind it, (ch 1, dc) X 7, ch 1, trc through the loop on rnd 6 of the star AND the hdc behind it, (ch 1, dc) X 3, ch 1, in the ch 2 corner work: dc, ch 2, dc. [corner made]
  3. Side three:  (ch 1, sk 1 st, dc) X 7, ch 1, dc through the ch 2 sp of the point on rnd 6 of the star AND the hdc behind it, ch 1, sk 1 st, dc) X  7, ch 1,  in the ch 2 corner work: dc, ch 2, dc. [corner made]
  4. Side 4:  (ch 1, dc) X 3, ch 1, trc through the loop on rnd 6 of the star AND the hdc behind it, (ch 1, dc) X 7, ch 1, trc through the loop on rnd 6 of the star AND the hdc behind it, (ch 1, dc) X 3, ch 1, in the ch 2 corner work: dc, ch 2, join to beg dc with ss. [corner made]

IMG_0067[1]

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s